I have a strange issue.
When I purchased my Hackintosh I went with the following network card:
Rosewill IEEE 802.11a/b/g/n PCI Express Upto 450Mbps Wireless N Dual Band Adapter (RNWD-N9003PCe)
It has served me well so far because my ISP speed has been less than 20mbps.
Yesterday, I upgraded my ISP to a 100mbps speed, and now I can't seem to get anything over 30mbps over the network card no matter how much I mess with the antenna.
Here is where it gets odd. About a week ago I decided to set up the bluetooth on my motherboard using a link someone found for me.
Gigabyte LGA 1150 Intel Z87 Dual Thunderbolt Ports Wi-Fi/BT4.0 ATX DDR3 2600 Motherboard - GA-Z87X-UD5 TH
The strange thing is that not only does the bluetooth seem to work, but the WiFi is now working as well. I decided to try and connect to the network for fun, and it turns out it not only works, but I am getting 75mbps.
Awesome right? Not quite.
The problem is that the WiFi says, "Wi-Fi Not Configured" and I can't see how many bars I have. Everything still seems to work, but OS X doesn't seem to understand that.
The only other small issue I found is that I can connect with my VPN, but if I disconnect, then try and reconnect, it doesn't work. I have to close the VPN software, and start it again for it to work.
So, I'm wondering if anyone has any ideas as to why this is happening, and what I can do to fix it?
Here are the cards my Hackintosh currently sees:
Software Versions: CoreWLAN: 4.3.3 (433.48) CoreWLANKit: 3.3.2 (332.36) Menu Extra: 9.3.2 (932.35) System Information: 9.0 (900.8) IO80211 Family: 6.3 (630.35) Diagnostics: 3.0 (300.40) AirPort Utility: 6.3.2 (632.3) Interfaces: en1: Card Type: AirPort Extreme (0x168C, 0x3112) Firmware Version: Atheros 9380: 4.0.74.0-P2P MAC Address: 68:1c:a2:01:3b:a5 Locale: Unknown Country Code: Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64 Wake On Wireless: Supported AirDrop: Supported Status: Off en2: Card Type: Third-Party Wireless Card MAC Address: 24:0a:64:95:8a:fc Supported PHY Modes: 802.11 a/b/g/n/ac Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 AirDrop: Supported Current Network Information: PHY Mode: 802.11n BSSID: 0c:54:a5:f9:1c:20 Network Type: Infrastructure Security: WPA2 Personal Signal / Noise: -52 dBm / -92 dBm Transmit Rate: 39 MCS Index: 10
I would like to have either the Motherboard WiFi working at top speeds, and configured correctly, or have the Network Card go faster. Either one will suit me fine.
Thanks for all your help.
CLM
submitted by Crazylegsmurphy
[link] [comment]
What is missing? Please comment to help! ...[source] For more info try www.iatkos.net
Post a Comment